Premium smart salt water chlorination engineered for silky soft water, zero chemical odors, and effortless pool sanitation. The Moov JustSalt system continuously converts natural pool salt into pure, active chlorine, eliminating the harsh red eyes, faded swimwear, and bleach odors associated with traditional granular or puck chlorine.
Technical specifications
| Warranty | Model MC50JUST Warranty 3 years Source: Moov warrantyWarranty is provided by the manufacturer under its own terms. See the source link for full details. |
|---|
Key features
- Smart self-cleaning reverse polarity cell — automatic periodic polarity reversal cleans calcium scale off titanium plates, ensuring peak sanitizing output with zero acid washing.
- Boost super-chlorination mode — 24-hour shock cycle handles heavy bather loads, summer heat waves, and intense rainstorms at the push of a single button.
- Low salt operation (2,500 – 3,200 PPM) — operates at a gentle salinity level similar to a human teardrop, gentle on skin and pool finishes.
- Intelligent water temperature detection — automatically reduces chlorine output in cooler water and includes winterizing shutoff protection.
- Intuitive digital display — clean LED indicators display real-time salt concentration, chlorine production percentage, and water flow alerts.
Specifications
| Brand | Moov |
|---|---|
| Series | JustSalt Series |
| Product type | Self-cleaning in-ground salt water chlorinator |
| Operating salinity | 2,500 to 3,500 PPM (Optimal: 3,000 PPM) |
| 50K L model (ATC-MC50JUST) | Pools up to 50,000 L (13,200 US gal) |
| 90K L model (ATC-MC90JUST) | Pools up to 90,000 L (24,000 US gal) |
| Cell life rating | Up to 10,000 operating hours with premium ruthenium coating |
| Electrical power supply | 120V / 240V multi-voltage internal power transformer |
| Plumbing union size | 2 in (with 1.5 in slip reducers included) |
Before you buy
- Pool water chemistry: Balance pH (7.2 – 7.6) and stabilizer / cyanuric acid (30 – 50 PPM) prior to adding initial pool salt.
- Salt requirement: Approximately one 20 kg bag of pure pool salt per 10,000 L of fresh water to reach initial operating salinity.
- Winter storage: Remove electrolytic cell and store indoors in a temperature-controlled space during Ontario sub-zero winter freeze.
Documents
Frequently asked questions
How much salt does the Moov JustSalt system require for initial startup?
The system operates at an optimal salinity of 3,000 PPM (2,500 to 3,500 PPM range). For a freshly filled pool with zero baseline salinity, you will need approximately one 20 kg (44 lb) bag of pure pool-grade salt for every 10,000 litres of pool water.
How does the self-cleaning reverse polarity cell work?
The Moov JustSalt controller automatically alternates electrical polarity across the titanium electrode plates at scheduled intervals. This process repels and dissolves calcium and mineral scaling without manual acid washing, preserving plate coatings and extending cell life.
What should I do with the Moov JustSalt cell during Ontario winters?
When closing your pool in autumn before Ontario sub-zero temperatures arrive, unscrew the 2-inch quick-disconnect unions and remove the electrolytic cell. Inspect the plates, rinse with fresh water, and store the cell indoors in a climate-controlled area until spring opening.
How does the Boost mode assist during heavy pool use or hot weather?
Activating Boost mode runs the cell at 100% capacity for a continuous 24-hour cycle. This super-chlorinates the pool after heavy rainfall, peak swimmer loads, or Ontario summer heatwaves without adding liquid shock or granular chlorine chemicals.
Specifications from manufacturer documentation. Exact cell configurations subject to revision.
Common questions
Is installation included?
No. AVL Shop sells equipment only. Installation is done by an independent licensed contractor that you hire.
How is freight charged?
Freight cost is included in your written quote before you pay.
What warranty does this product have?
The manufacturer warranty applies. Where we have the manufacturer’s exact wording, it is shown in the Warranty row of the specifications on this page, with a link to the source.
How do I get a quote?
Use Request a quote on this page and send the model and your city or postal code.